connecting_to_network_printers

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
connecting_to_network_printers [2026/05/13 12:53] – gjohnconnecting_to_network_printers [2026/05/13 12:58] (current) – gjohn
Line 24: Line 24:
     * Enter the IP address in the ''Address:'' field     * Enter the IP address in the ''Address:'' field
     * Make sure "Internet Printing Protocol - IPP" is selected     * Make sure "Internet Printing Protocol - IPP" is selected
-      * For Joy, select AirPrint instead. 
     * Enter the printer name in the ''Name:'' field     * Enter the printer name in the ''Name:'' field
     * Click "add"     * Click "add"
Line 32: Line 31:
 Printing from iOS is more involved because you cannot manually add printers by domain or IP, so it needs extra configuration to be able to find them automatically. Printing from iOS is more involved because you cannot manually add printers by domain or IP, so it needs extra configuration to be able to find them automatically.
  
-  * Setup instructions 
     * Connect to Caltech Secure     * Connect to Caltech Secure
     * Open settings and tap on Wi-Fi     * Open settings and tap on Wi-Fi
Line 38: Line 36:
     * Scroll to the bottom and tap Configure DNS     * Scroll to the bottom and tap Configure DNS
     * Select Manual. You should see three IP addresses under DNS servers.     * Select Manual. You should see three IP addresses under DNS servers.
-    * Tap Add Search Domain, enter dabney.caltech.edu, and tap return+    * Tap Add Search Domain, enter ''dabney.caltech.edu'', and tap return
     * Tap Save in the top right corner     * Tap Save in the top right corner
  
  • connecting_to_network_printers.1778702011.txt.gz
  • Last modified: 2026/05/13 12:53
  • by gjohn